工业纤维素废水的处理方法  

The Treatment Method of Industrial Cellulose Wastewater

作　　者：曾俊 钱科峰 

机构地区：[1]江苏哈宜环保研究院有限公司,江苏宜兴214205 [2]江苏鼎泽环境工程有限公司,江苏宜兴214205

出　　处：《广东化工》2015年第14期178-179,共2页Guangdong Chemical Industry

摘　　要：江苏某精细化工公司废水处理工程设计规模100 m3/d,采用水解酸化＋UASB＋好氧组合工艺进行废水处理,进水CODcr、氯离子浓度分别为13600 mg/L、6000 mg/L,出水CODcr浓度为340-500 mg/L,CODcr去除率为96.3%,达到《污水综合排放标准》（GB 8978-1996）三级标准。A Fine Chemical Company In Jiangsu province wastewater treatment project design capacity of 100 m3/d, using Hydrolysis acidification-UASB-Aerobic combined technique for wastewater treatment, the influent water CODcr、Chloride ion concentration were 13600 mg/L and 6000 mg/L, the effluent CODcr were 340-500 mg/L, the removal efficiency were 96.3 %, which get the three standard of《Integrated Wastewater Discharge Standard 》（GB 8978-1996）.

关 键 词：水解酸化 UASB 好氧 废水处理 

分 类 号：X5[环境科学与工程—环境工程]