检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王书强[1] 庞小仁 黄成建[1] 沈道海[2] 章卫钢[1,2] 李延军[1,2]
机构地区:[1]浙江农林大学工程学院,浙江临安311300 [2]浙江农林大学浙江省木材科学与技术重点实验室,浙江临安311300
出 处:《浙江农林大学学报》2015年第4期590-595,共6页Journal of Zhejiang A&F University
基 金:浙江省自然科学基金资助项目(LZ13C160003);浙江省科学技术面上项目(2013C14006);浙江省林业厅资助项目(2014TS02)
摘 要:利用复配阻燃剂采用常压浸渍法研究温度、时间、浸渍质量浓度等对竹单板载药量的影响,并测试不同载药量薄竹胶合板的燃烧和力学性能。结果表明:在温度为60℃,时间为8.0 h,浸渍质量浓度为300.0 g·L-1时为最佳浸渍条件;随着载药量的增加薄竹胶合板的热释放速率、总热释放量、烟释放速率和总烟释放量都减小,而残余物质剩余量和点燃时间在逐渐增加;氧指数测试结果表明:经过阻燃处理的薄竹胶合板的氧指数都有较明显的提高,并且随着载药量的增加而增加,当载药量A≥8%,其氧指数已达到GB/T 9846.7-2004中B1级胶合板和日本JISD1322-1977中的难燃一级品的要求;胶合强度测试表明经过阻燃处理的薄竹胶合板其胶合强度随着载药量的增加有所下降。胶合强度和含水率均能满足Ⅱ类普通胶合板的国家标准指标值。In order to restrain the combustion of the sliced bamboo plywood and its products, which were used as decorating materials, significantly the materials above should be treated with fire retardant to increase their safety security. The effect of temperature, time, and dipping concentration on the chemical loading of sliced bamboo veneer were tested by thermostatic bath utilizing complex fire retardants at constant pressure. Com- bustible properties and mechanical properties of the fire-retardant sliced bamboo plywood were also determined using oxygen index and bonding strength tests. Results showed that the best impregnation conditions were 60 ~C for 8.0 h at an impregnation concentration of 300.0 g. L-1. Combustible properties of heat release rate, total heat release quality, and smoke release rate, decreased as chemical loading increased; however, residual material quantity and light time increased. The oxygen index of the treated plywood increased; when the chemical load- ing was 8%, the oxygen index reached the B1 fire-retardant grade as per JISD 1322-1977. Although bonding strength decreased with an increase in chemical loading, the national standard for Class Ⅱ plywood was main- tained. So, it was feasible that Sliced Bamboo plywood could be manufactured by the impregnation process un- der atmospheric pressure.
分 类 号:S781.9[农业科学—木材科学与技术] TS653[农业科学—林学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.147