汽车拉索套管帽用易脱模增韧PA6的研制  

Development of Good Release Property and Toughened PA6 for Sleeve Cap of Automobile Cable

作　　者：叶淑英[1,2,3] 刘罡[2,3] 李又兵[1] 

机构地区：[1]重庆理工大学材料科学与工程学院,重庆400054 [2]中煤科工集团重庆研究院有限公司矿用新材料研究所,重庆401332 [3]重庆科聚孚工程塑料有限责任公司,重庆401332

出　　处：《工程塑料应用》2015年第8期25-29,共5页Engineering Plastics Application

摘　　要：研究了增韧剂种类、润滑剂种类及其含量对尼龙(PA)6力学性能及脱模效果的影响。结果表明,增韧剂的加入提高了PA6的脱模性,且不同增韧剂对脱模性提高幅度不同;润滑剂的加入能改善增韧PA6的脱模性,润滑剂A和C搭配具有协同作用,当其质量分数为1%时,增韧PA6的脱模性及力学性能综合效果最佳。采用增韧易脱模PA6注塑成型的汽车拉索套管帽综合性能符合技术指标要求,脱模性良好,达到了客户的预期目标。The effects of lubricant and toughening angent on mechanical properties and release property of nylon 6 were studied.The results show that toughening agent and lubricants can increase the release property of nylon 6.The mechanical properties and release property are optimal when the amount of lubricant A and C were 1%.The sleeve cap of automobile cable made from the toughened and good releasing property nylon 6 can meet the application requirements perfectly,which achieves customer＇s expected goal.

关 键 词：尼龙6 增韧 脱模性 润滑剂 

分 类 号：TQ323.6[化学工程—合成树脂塑料工业]