Effect of pumping chamber on performance of non-overload centrifugal pump  

作　　者：谷云庆 牟介刚 代东顺 郑水华 吴登昊 蒋兰芳 施瀚昱 WANG Evan 

机构地区：[1]College of Mechanical and Engineering, Zhejiang University of Technology [2]Engineering Research Center of Process Equipment and Its Re-manufacturing of Ministry of Education(Zhejiang University of Technology) [3]Zhijiang College, Zhejiang University of Technology [4]Institut National Polytechnique of Grenoble, Joseph Fourier University

出　　处：《Journal of Central South University》2015年第8期2989-2997,共9页中南大学学报（英文版）

基　　金：Projects(51476144,51305399)supported by the National Natural Science Foundation of China;Project(LQ15E050005)supported by the Zhejiang Provincial Natural Science Foundation,China

摘　　要：In order to specify the characteristics of un-overloaded centrifugal pumps, the IH100-65-200 pump was chosen as the model pump. Different calculation models for centrifugal pumps were established under different pumping chamber sectional parameters. In the numerical simulation of the centrifugal pumps flow field, the shaft power, head, efficiency, and the changes of the internal flow field under different sectional areas and sectional shapes were studied with the RNG k-ε turbulence model, and the influence of the pumping chamber section characteristics of the non-overloaded centrifugal pumps were analyzed. The results show that sectional areas have a significant impact on the non-overload characteristics of centrifugal pumps. The shaft power and head of centrifugal pump are increasing with a lager sectional area, by which the gradient of head curves decreases. The efficiency is improved under a large flow rate condition, but the head and the efficiency are reduced at a small flow rate. It is also observed that the sectional shapes have less influence on the shaft power, the hydraulic performance and flow field characteristics of a centrifugal pump.In order to specify the characteristics of un-overloaded centrifugal pumps, the IH100-65-200 pump was chosen as the model pump. Different calculation models for centrifugal pumps were established under different pumping chamber sectional parameters. In the numerical simulation of the centrifugal pumps flow field, the shaft power, head, efficiency, and the changes of the internal flow field under different sectional areas and sectional shapes were studied with the RNG k-ε turbulence model, and the influence of the pumping chamber section characteristics of the non-overloaded centrifugal pumps were analyzed. The results show that sectional areas have a significant impact on the non-overload characteristics of centrifugal pumps. The shaft power and head of centrifugal pump are increasing with a lager sectional area, by which the gradient of head curves decreases. The efficiency is improved under a large flow rate condition, but the head and the efficiency are reduced at a small flow rate. It is also observed that the sectional shapes have less influence on the shaft power, the hydraulic performance and flow field characteristics of a centrifugal pump.

关 键 词：centrifugal pumps sectional area sectional shape non-overload characteristics numerical simulation 

分 类 号：TH311[机械工程—机械制造及自动化] TD43[矿业工程—矿山机电]