基于fMRI的立体视觉数据分析辅助诊断系统  

A Stereovision Data Analysis and Computer Aid Diagnoses System Based on fMRI

作　　者：刘永 张莉[2] 马竟锋 高嵩[3] 邱学军[4] 

机构地区：[1]中国石油大学(华东)计算机与通信工程学院,青岛266580 [2]首都医科大学附属同仁医院,北京100005 [3]北京大学医学部医学影像物理与工程实验室,北京100191 [4]中国科学院北京大恒医疗设备公司,北京100081

出　　处：《中国医疗器械信息》2015年第7期66-70,共5页China Medical Device Information

基　　金：国家科技支撑计划(2012BAI23B07);中央高校基本科研业务费专项资金(14CX06145A)

摘　　要：目的:通过立体视觉数据分析系统处理f MRI数据,验证该软件是否可行;方法:被试在3D和2D片源刺激下的f MRI数据经过对齐、配准、分割、标准化、平滑、一般线性分析和T检验,得出3D-2D的激活区,并与专业软件SPM对比结果精确性与处理耗时;结果:确立了三维立体视觉特征脑激活图谱,在保证结果精确性的基础上处理时间减少30%;结论:BA18、BA19、BA37分区是否激活可以作为三维立体视觉功能检测的重要依据,该分析系统可作为f MRI立体视觉分析的辅助软件。Objective： FMRI data was processed by stereovision data analysis system to verify the feasibility of the software.Methods： FMRI data under the stimulation of 2D and 3D was processed through a series of steps, realignment, registration, segmentation, normalization, smooth, general linear analysis and T test. Finaly the activation area under the condition of 3D-2D was got. Then contrast the accuracy and processing time with the professional software SPM.Results： The brain activation map of stereovision was established. Compared with SPM, the accuracy was the same and the processing time was reduced by 30%.Conclusions： BA18, BA19, and BA37 are the important basis for the detection of stereovision. This analysis system can be used as an assistant software for fMRI stereovision analysis.

关 键 词：FMRI 立体视觉 激活簇 SPM 

分 类 号：R445.2[医药卫生—影像医学与核医学]