检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:杨磊[1] 傅俏燕[1] 潘志强[1] 张学文[1] 韩启金[1] 刘李[1]
出 处:《红外与激光工程》2015年第8期2456-2460,共5页Infrared and Laser Engineering
基 金:国家863计划重点课题(2012AA12A302);国家863计划重点项目(2009AA122100)
摘 要:利用Landsat8-OLI时间序列图像数据对高分一号(GF-1)的16 m宽覆盖多光谱传感器进行交叉定标。试验首先通过安排GF-1夜间深海成像,确定GF-1传感器的定标公式的截距,再选取定标靶标场的双星同步观测数据,利用回归分析得到定标公式的增益。利用交叉定标系数结果计算的GF-1辐亮度值与同步观测的Landsat8的辐亮度值相关性在95%以上,4个波段定标精度相对误差分别是4.25%、6.21%、5.83%和5.66%。结果表明该方法获得的定标系数精度与Landsat8定标数据辐射定标精度相当,GF-1卫星可以满足定量化应用的要求。This paper is about the radiometric cross-calibration method of GF-1 image with landsatS-OLI data. First the cross-calibration was implemented using the night deep sea imaging to obtain the bias of GF-1 cross-calibration coefficient. Then eight times images of two sensors passing through the target place were selected to obtain the gains of the GF-1 cross-calibration coefficient. The correlation between the radiance value calculated by the cross-calibration coefficient and the synchronous observations of the Landsat8 radiance value is above 95%. The accuracy relative errors of the 4 bands are 4.25%, 6.21%, 5.83% and 5.66% respectively. The results show that the calibration coefficients obtained from the method have a similar precision as LandsatS-OLI. The calibration coefficients can satisfy the quantitative applications of GF-1 data.
关 键 词:交叉定标 GF-1 Landsat8 夜间深海成像 时间序列
分 类 号:TP731[自动化与计算机技术—检测技术与自动化装置]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.220.70.192