Detecting and monitoring of water inrush in tunnels and coal mines using direct current resistivity method:A review  

作　　者：Shucai Li Bin Liu Lichao Nie Zhengyu Liu Mingzhen Tian Shirui Wang Maoxin Su Qian Guo 

机构地区：[1]Geotechnical and Structural Engineering Research Center, Shandong University

出　　处：《Journal of Rock Mechanics and Geotechnical Engineering》2015年第4期469-478,共10页岩石力学与岩土工程学报（英文版）

基　　金：supported by the National Program on Key Basic Research Project of China (973 Program) (Nos. 2013CB036002 and 2014CB046901);the National Key Technology R&D Program of the Ministry of Science and Technology of China (No. 2013BAK06B01);the National Natural Science Foundation of China (No. 51139004)

摘　　要：Detecting, real-time monitoring and early warning of underground water-bearing structures are critically important issues in prevention and mitigation of water inrush hazards in underground engineering. Direct current （DC） resistivity method is a widely used method for routine detection, advanced detection and real-time monitoring of water-bearing structures, due to its high sensitivity to groundwater. In this study, the DC resistivity method applied to underground engineering is reviewed and discussed, including the observation mode, multiple inversions, and real-time monitoring. It is shown that a priori information constrained inversion is desirable to reduce the non-uniqueness of inversion, with which the accuracy of detection can be significantly improved. The focused resistivity method is prospective for advanced detection;with this method, the flanking interference can be reduced and the detection dis-tance is increased subsequently. The time-lapse resistivity inversion method is suitable for the regions with continuous conductivity changes, and it can be used to monitor water inrush in those regions. Based on above-mentioned features of various methods in terms of benefits and limitations, we propose a three-dimensional （3D） induced polarization method characterized with multi-electrode array, and introduce it into tunnels and mines combining with real-time monitoring with time-lapse inversion and cross-hole resistivity method. At last, the prospective applications of DC resistivity method are discussed as follows： （1） available advanced detection technology and instrument in tunnel excavated by tunnel boring machine （TBM）, （2） high-resolution detection method in holes, （3） four-dimensional （4D） monitoring technology for water inrush sources, and （4） estimation of water volume in water-bearing structures.Detecting, real-time monitoring and early warning of underground water-bearing structures are critically important issues in prevention and mitigation of water inrush hazards in underground engineering. Direct current （DC） resistivity method is a widely used method for routine detection, advanced detection and real-time monitoring of water-bearing structures, due to its high sensitivity to groundwater. In this study, the DC resistivity method applied to underground engineering is reviewed and discussed, including the observation mode, multiple inversions, and real-time monitoring. It is shown that a priori information constrained inversion is desirable to reduce the non-uniqueness of inversion, with which the accuracy of detection can be significantly improved. The focused resistivity method is prospective for advanced detection;with this method, the flanking interference can be reduced and the detection dis-tance is increased subsequently. The time-lapse resistivity inversion method is suitable for the regions with continuous conductivity changes, and it can be used to monitor water inrush in those regions. Based on above-mentioned features of various methods in terms of benefits and limitations, we propose a three-dimensional （3D） induced polarization method characterized with multi-electrode array, and introduce it into tunnels and mines combining with real-time monitoring with time-lapse inversion and cross-hole resistivity method. At last, the prospective applications of DC resistivity method are discussed as follows： （1） available advanced detection technology and instrument in tunnel excavated by tunnel boring machine （TBM）, （2） high-resolution detection method in holes, （3） four-dimensional （4D） monitoring technology for water inrush sources, and （4） estimation of water volume in water-bearing structures.

关 键 词：Direct current （DC） resistivity methodTechnical statusLatest progressUnderground engineeringWater inrushRoutine detectionAdvanced detectionReal-time monitoring 

分 类 号：TD745[矿业工程—矿井通风与安全]