检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王洪超[1] 刘红元[1] 王恒飞[1] 应承平[1] 吴斌[1]
机构地区:[1]中国电子科技集团公司第四十一研究所,山东青岛266555
出 处:《光学学报》2015年第A01期184-189,共6页Acta Optica Sinica
基 金:“十二五”计量技术基础科研项目(J312012A003)
摘 要:系统增益是电荷耦合器件(CCD)的重要技术参数之一,它是测定量子效率、读出噪声、满阱容量等性能参数的基础。随着成像技术的发展,精确标定CCD的系统增益变得越来越重要。介绍了光子转移曲线(PTC)方法标定系统增益的原理,提出利用改变光源强度的方式来获取光子转移曲线,并搭建了相关测试系统,实现了CCD系统增益的精确标定,得出被测器件的系统增益值为1.6229e/ADU。同时还和改变曝光时间的测量方式进行了对比,两种方法的标定结果基本一致,验证了本方案的准确性。最后,对标定结果进行了不确定度评定。System gain is one of the important parameters of charge coupled device (CCD), from which many of the other performance parameters such as quantum efficiency, readout noise, full well CCD and so on are determined. With the development of imaging technology, accurate calibration for the system gain of CCD become more and more important. The theory of measuring system gain based on photon transfer curve technique is introduced. A method to acquire photon transfer curve by changing light intensity is proposed. At the same time, an experimental setup is constructed to calibrate system gain of CCD precisely. It is shown that the result of calibration is 1. 6229e-/ADU which has a good consistency with the method to obtain photon transfer curve by changing exposure time. At last, the uncertainty of this calibration is evaluated.
关 键 词:光学器件 CCD标定 系统增益 光子转移曲线 不确定度
分 类 号:TN386.5[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.188.195.92