基于SCCB总线配置的FPGA视频采集系统设计  

Design of FPGA Video Acquisition System Based on SCCB Bus Configuration

作　　者：杨会建 杨阳[1] 张环[1] 朱莹[1] 

机构地区：[1]长春理工大学电子信息工程学院,长春130022

出　　处：《长春理工大学学报（自然科学版）》2015年第4期97-100,共4页Journal of Changchun University of Science and Technology(Natural Science Edition)

摘　　要：为了提高视频采集的实时性,利用EP2C8Q208C8作为主控芯片来控制CMOS传感器OV7670,采用Verilog语言构建了硬件描述电路。在研究SCCB通信协议的基础上,建立了FPGA和视频采集传感器之间的通信,且对OV7670内部寄存器进行了相关配置,实现在不同模式下视频信号的采集。利用Signal Tap II对OV7670视频采集的动态数据进行了实时捕捉,将捕捉波形图对比时序进行了分析。实验结果表明,该视频采集系统除具有低成本、低功耗等优点外,还具有很好的可行性、实时性。In order to improve the real-time video acquisition.In this design, EP2C8Q2O8C8 is chosen as the master chip to control the CMOS sensor OV7670. The hardware descriptkm circuit is constructed by Verilog language. On the basis of Ihe research SCCB communication protocol, the communication between FPGA and video capture sensor is es tablished. And the internal register of OV7670 is configured to realize the collection of video signal in different mode. SignalTap II is used to capture the dynamic data about OV7670 video acquisition. A comparison is made between the capture waveform and video acquisition sequence. The experimental results show that the video acquisition system be sides has the advantages of low cost, low power consumption, also has the very good feasibilily, real-lime.

关 键 词：SCCB总线 FPGA 通信协议 视频采集 

分 类 号：TP302.2[自动化与计算机技术—计算机系统结构]