基于Pro/E的数控车削加工仿真  

Numerical control turning processing simulation based on Pro/E

作　　者：毕俊喜[1] 任昭[1] 

机构地区：[1]内蒙古工业大学机械学院,内蒙古呼和浩特010051

出　　处：《现代机械》2015年第4期5-7,共3页Modern Machinery

基　　金：内蒙古自然科学基金资助(项目号2012MS0731)

摘　　要：以某高速电转轴中的转轴为例,利用Pro/Engineer 5.0中的Pro/NC模块对其进行模拟车削加工仿真,将传统的二次装卡应用到自动编程中,完成数控刀路文件(.ncl文件)和G代码(.tap文件)的创建,并通过屏幕演示和在VERICUT中的模拟仿真验证可行性,最后经过后处理器Gpost生成可在FAUNC数控车床上运行的G代码,有助于优化数控车削加工工艺。Aimed at a rotary shaft of high - speed electric shaft , the present study adopted Pro/NC modules in Pro/Engi- neer 5.0 to simulate turning processing, applying traditional secondary clamping in automatic programming to create the NC cutter path file （. Ncl documents） and G code （. Tap document）. Then the feasibility was verified through screen display and simulation in VERICUT. Finally the post -processor Gpost generated G code which could be run on numerical control lathe of FAUNC, which is helpful to improve the numerical control turning processing.

关 键 词：车削仿真 后处理 

分 类 号：TH164[机械工程—机械制造及自动化]