湿法炼锌硫酸盐溶液中除氟试验研究  

Experimental Study on Defluoridation of Sulfate Solution from Hydrometallurgical Extraction of Zinc

作　　者：胡安生[1] 张旭[1] 沈庆峰[1] 张积锴 孙敬会[1] 

机构地区：[1]昆明理工大学冶金与能源工程学院,云南昆明650093

出　　处：《矿冶工程》2015年第4期101-103,共3页Mining and Metallurgical Engineering

摘　　要：采用一种新型铝基复合除氟剂,以吸附沉淀法从湿法炼锌硫酸盐溶液中除氟。试验结果表明:在初始氟浓度为300 mg/L的硫酸锌溶液中,加入除氟剂20 g/L,反应时间80 min,温度50℃,p H值4.5的条件下,除氟率可达87.88%,除氟后液残氟浓度为36.35 mg/L,能满足电积锌的要求。Adsorption-precipitation method was used for defluoridation of sulfate solution from hydrometallurgical extraction of zinc by using a novel alumina-containing composite defluoridation reagent. The results show, with the concentration of defluoridation reagent as 20 g/L,reaction time of 80 min, pulp temperature at 50 ℃ and pH value of 4.5, the defluoridation rate for the zinc sulfate solution with the initial fluoride concentration at 300 mg/L attains 87.88%, and the solution meets the requirements of zinc electrowinning as the residual fluoride concentration therein is reduced to 36.35 mg/L.

关 键 词：湿法炼锌 硫酸锌溶液 除氟 

分 类 号：TF111[冶金工程—冶金物理化学]