行波型旋转超声电机定子振动特性仿真  

Analysis of the Vibration Characteristic of a Stator on a Traveling Wave Type Ultrasonic Motor

作　　者：伍旺贤 纪跃波[1] 王涛[1] 

机构地区：[1]集美大学机械与能源工程学院,福建厦门361021

出　　处：《集美大学学报（自然科学版）》2015年第4期292-296,共5页Journal of Jimei University：Natural Science

基　　金：福建省自然科学基金资助项目(2013J01200)

摘　　要：为了了解定子直径为60 mm的行波型旋转超声电机定子的振动特性,采用有限元分析的方法,在有限元软件ANSYS10.0中对其进行了模态、谐响应、瞬态仿真分析.得到了其模态频率及振型;振幅及阻抗随频率的变化关系;定子齿端质点的椭圆运动轨迹的形成过程,及其输入电流随时间的变化规律.Analysis of a stator’s vibration characteristics of a traveling wave type ultrasonic motor was car-ried out in this paper. The research was conducted on the stator having a diameter about 60mm by employing finite element method on the stator＆#39;s modal analyses, harmonic analyses and transient analyses via finite ele-ment software ANSYS10. 0 . It shows that the result from analysis is beneficial to the determination of the stator’s vibration modal and resonance frequency, the relations between vibration amplitude, impedance and frequency, the ellipse trajectory formation process of a particle which belongs to the stator’s tooth tip and the relation between input current of stator and time. Conclusions were drawn that the method of finite element a-nalysis is applicable to the motor design, production and experimental study.

关 键 词：超声电机 定子 有限元法 振动特性 仿真分析 

分 类 号：TM359.9[电气工程—电机]