检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张建华[1,2] 彭文飞[1,2] 沈法[1,2] 束学道[1,2] 刘文萍[1,2]
机构地区:[1]宁波大学机械工程与力学学院,浙江宁波315211 [2]浙江省零件轧制成形技术研究重点实验室,浙江宁波315211
出 处:《热加工工艺》2015年第17期80-83,共4页Hot Working Technology
基 金:国家自然科学基金项目(51405248);国际科技合作项目(CB11-13);浙江省科技厅项目(Y201224321);宁波市自然科学基金项目(2013A610043)
摘 要:在相同工艺参数下,通过有限元ANSYS/LS-DYNA模拟,得到楔横轧层合轴和单层轴相同位置跟踪点处的最大横向应力、平均应力、最大剪应力和最大剪应变的变化情况。通过对比应力应变,得出了层合轴分界面处的应力应变特点,阐释了层合轴分界面处的结合机理,这能为改善层合轴分界面处的结合质量提供理论依据。The maximum transverse stress, the average stress, the maximum shear stress and the maximum shear strain of the tracking points on the same position of cross wedge rolling laminated shaft and single shaft were obtained by ANSYS/LS-DYNA finite element simulation with the same rolling process parameters. Through the comparison of stress and strain on the tracking points, the stress and strain characteristics of cross wedge rolling laminated shaft were obtained. And the interface binding mechanism of cross wedge rolling laminated shaft was elaborated. It can provide theoretical basis for improving the interfacing binding quality of laminated shaft.
分 类 号:TG335.19[金属学及工艺—金属压力加工]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249