轨道衡剪力传感器过盈装配对测量区的影响研究  

Study on the Impact of the Shearing Force Sensor with an Interference Fit on the Rail Weigher to the Measure Area

作　　者：徐劲力[1] 陈智磊[1] 罗文欣 

机构地区：[1]武汉理工大学机电工程学院

出　　处：《计量学报》2015年第5期521-525,共5页Acta Metrologica Sinica

摘　　要：针对动态轨道衡塞入式剪力传感器称重原理进行分析，确定了传感器弹性体应变片的位置及贴片区域和应变片测量栅丝的排布方向；采用有限元仿真分析得出传感器过盈装配对应变测量区影响的平面剪应力分布云图，确定了弹性体应变区的贴片范围。通过分析不同过盈量及接触区时弹性体的变形，研究了预紧力大小对传感器性能的影响。The weighing principle of the shearing force sensor is explained, and the way to stick the strain gage and the direction of the metal gate by theoretical computation are decided. The assembling stress can be calculated through the finite element analysis software, and then the strain area of the elastomer is known. The deformation of the elastomer with differdent interference and contact area is gotten so that the effect of preloading on the sensor can be sure.

关 键 词：计量学 剪力传感器 过盈配合 轨道衡 有限元 

分 类 号：TB931[一般工业技术—计量学]