滑移爆轰密封的初步数值模拟  

Preliminary simulation of blast shutter driven by glancing detonation

作　　者：袁帅[1] 柏劲松[1] 张汉钊[1] 李平[1] 

机构地区：[1]中国工程物理研究院流体物理研究所,四川绵阳621999

出　　处：《爆炸与冲击》2015年第4期496-500,共5页Explosion and Shock Waves

基　　金：国家自然科学基金项目(11372294)

摘　　要：利用有限元方法,通过数值模拟得到爆炸密封铝、铜封管密封所需炸药药量;在此基础上,利用光滑粒子法对爆炸密封模型进行优化,分析炸药、保护外壳等形状等对封管密封性能的影响。基于对计算结果的分析,确定实验模型。实验回收结果和数值模拟结果符合较好,表明数值模拟结果对实验设计有指导作用。The mass of explosive which the aluminum/copper cylinder shells were blasted shutter was found with finite element methods. And on the basis of this, the blast shutter models were simulated many times by the smoothed particle hydrodynamics method to achieve optimization. Then the experimental models were determined by comparing the simulation results. The experimental results agree with the simulation results. So the simulation results can be helpful for understanding the experimental results, and it saves the time and increases the efficiency.

关 键 词：爆炸力学 光滑粒子方法 爆炸密封 封管 滑移爆轰 

分 类 号：O381[理学—流体力学]