基于SolidWorks的高精度气体静压电主轴的结构设计研究  

Research on Structure Design of High-precision Aerostatic Motorized Spindle Based on Solid Works

作　　者：于贺春[1] 李欢欢[1] 马文琦[2] 乔雪涛[1] 赵则祥[1] 赵惠英[1] 

机构地区：[1]中原工学院机电学院,河南郑州450007 [2]大连海事大学交通运输装备与海洋工程学院,辽宁大连116026

出　　处：《机床与液压》2015年第17期62-65,共4页Machine Tool & Hydraulics

基　　金：国家自然科学基金资助项目(51075048);河南省教育厅自然科学研究计划项目(2011B460021;12B460030)

摘　　要：以高精度气体静压电主轴为研究对象,介绍了"T"字型、"工"字型及"中"字型等3种结构类型的应用特点;采用Solid Works软件对3种结构类型进行模态计算分析,并与Ansys软件的计算结果进行了对比;在模态分析中,研究了结构类型、轴向刚度大小等对转子特性的影响。结果表明:Solid Works的模态计算精度可以满足电主轴结构设计的理论分析需求;提高轴向刚度有助于提高各阶模态值,尤其是二、三阶模态值;在相同条件下,"中"字型电主轴结构具有较高的各阶模态值。The high-precision aerostatic motorized spindle was taken as the research object,the application characteristics of the three structure types( the 'T'type,the '工'type and the '中' type) were introduced. The modal analysis of the three structure types were carried out with the Solid Works software,and the results were compared with the ones of the Ansys software. In the modal analysis,the effects of the structure type and the axial stiffness on the rotor characteristics were studied. The result shows that the calculation precision of the Solid Works software can meet the demand of the theoretical analysis of motorized spindle structure design,improving the axial stiffness is able to improve the modal values,especially the second and the third order modal values,and the same working condition,the '工' type motorized spindle has higher modal values than the other two types.

关 键 词：高精度 气体静压 电主轴 SOLIDWORKS 结构类型 

分 类 号：TH133.3[机械工程—机械制造及自动化]