检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张雪霞[1] 葛廷武[1] 董繁龙[1] 谭祺瑞[1] 王智勇[1]
机构地区:[1]北京工业大学激光工程研究院,北京100124
出 处:《激光与红外》2015年第9期1040-1044,共5页Laser & Infrared
摘 要:用自制耦合器搭建了全光纤激光振荡器,通过不同的泵浦方式对全光纤激光器进行了实验研究。实验装置中加入包层光剥离器,纤芯/包层分别为20/400μm的有源光纤作为增益光纤。实验中未加特定的冷却装置,选用2个110 W激光二极管分别进行前向和后向泵浦,在总泵浦功率223.6 W时,前向泵浦方式中获得激光功率输出152.2 W,光-光转换效率69%;后向泵浦方式中,激光功率输出156.5 W,光-光转换效率70%。最后,进行了双向泵浦实验,泵浦光功率443.8 W时,1080 nm近单模激光功率输出311 W,光-光转换效率70%。进一步增加泵浦功率,会获得更高功率的1080nm激光输出。Using self-developed side-pumped couplers, a multipoint side-pumped, ytterblum-doped double-clad all-fiber laser was built, and this laser was studied under different types of pumping. In the experiment, cladding optical dissector was added ; gain fiber was active fiber of 20/400 p,m. The setup didn' t have specific cooling device. When the maximum pump power is 223.6 W,the output power for forward pumping is 152. 2 W,and the center wave length is 1080 nm,optical-optieal conversion efficiency is 69% ;for backward pumping, the output power of 1080 nm is 156. 5 W,optical-optical conversion efficiency is 70%. Maximum output power of 311 W is obtained with the pumping power of 443.8 W for double-end pumping;optical-optical conversion efficiency is 70%.
关 键 词:激光器 全光纤激光器 双包层光纤 耦合器 高功率
分 类 号:TN245[电子电信—物理电子学] TN248
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28