轴向车铣TC4钛合金表面粗糙度的研究  

Study on Surface Roughness of Workpiece Machined by Axial Turn-milling

作　　者：范祎[1] 梁金刚 

机构地区：[1]沈阳理工大学 [2]解放军驻724厂军代表室

出　　处：《工具技术》2015年第9期102-104,共3页Tool Engineering

摘　　要：通过试验研究了轴向车铣TC4钛合金时,切削速度和每齿进给量对表面粗糙度的影响。研究结果表明,切削速度在50m/min到150m/min范围内对已加工表面粗糙度没用明显的影响;每齿进给量从0.05mm增加到0.15mm,已加工表面粗糙度明显增大。It was research by the experiment of the feed per tooth and the cutting speed on the influence of TC4 titani- um alloy surface roughness machined by the axial turn-milling. The results show that in the 50 rn/min to 150 m/rain, the influence of cutting speed on machined surface roughness was useless obviously; and the feed per tooth increased from 0.05 mm to 0.15 ram, the machined surface roughness increased obviously.

关 键 词：轴向车铣 TC4钛合金 表面粗糙度 

分 类 号：TG506[金属学及工艺—金属切削加工及机床]