3D打印在水运工程中的应用展望及面临问题  

Application Prospect and Problems of 3D Printing in Port & Waterway Engineering

作　　者：欧阳飞[1] 曹周红[2] 胡峰军[1] 孙保虎[1] 游涛[2] 

机构地区：[1]湖北省交通规划设计院,武汉430051 [2]长沙理工大学,长沙410076

出　　处：《水利科技与经济》2015年第9期105-107,共3页Water Conservancy Science and Technology and Economy

基　　金：国家自然科学基金资助项目(51309037)

摘　　要：水运工程具有投资大、建设周期长等特点。结合目前正迅速兴起的3D打印技术,提出了其在水运工程建设中的应用设想,并从科研、设计、施工、管理等方面分析目前需要解决的问题,同时提出相应的发展建议,希望引起相关部门和单位的重视,并开展进一步的探讨和研究,使之变为现实。The port ＆ waterway project is a large- scale project with large investment and long construction period. According to the advantages of 3D printing,the paper proposes the idea of adopting3 D printing to build the structures. Further,the paper analyzes the current difficulties from the research,design,construction,management aspects etc. In addition,the paper puts forward the suggestions for the development of 3D printing and hopes it can attract the attention of the relevant departments so as to carry out further discussion and research and put it into reality.

关 键 词：水运工程 3D打印 设计 施工 

分 类 号：TV862[水利工程—水利水电工程]