非洲菊切花瓶插期间的弯茎特性  被引量:2

Properties of stem bending of cut gerbera flowers during vase life

在线阅读下载全文

作  者:程桂平[1] 吴志成 何秋微 黄新敏[1] 吴汉清[1] 魏富玉 何生根[1] 

机构地区:[1]仲恺农业工程学院生命科学学院,广东广州510225

出  处:《仲恺农业工程学院学报》2015年第3期1-4,共4页Journal of Zhongkai University of Agriculture and Engineering

基  金:国家自然科学基金(31000926;31272193);广东省自然科学基金(S2011040000402;2014A030311027)资助项目

摘  要:就非洲菊(Gerbera jamesonii Bolus)‘寒王’、‘秋日’、‘法莱伦斯’、‘红艳’和‘达罗贝尔’等5个栽培种采后瓶插期间的弯茎特点进行了比较和分析,并以‘秋日’品种为试材就其直立程度、花茎长度、离水时间和光照时间等对花枝弯茎的影响进行了研究.结果表明,非洲菊不同品种的弯茎率差异较大,其中以‘红艳’的弯茎率最低(22.50%),‘达罗贝尔’的弯茎率最高(86.25%);各品种的瓶插寿命也有所不同,‘红艳’最短为5.6 d,‘达罗贝尔’最长为8.1 d;5个非洲菊切花品种的弯茎位置70%以上均位于距花冠基部6~12 cm的茎段.‘秋日’的直立程度与其弯茎率呈显著负相关关系,即直立程度越小弯茎率越大,当直立程度为花茎与水平面呈90o时,弯茎率最小,仅为26.7%.但是,花茎长度、离水时间和瓶插期间的光照时间对‘秋日’的弯茎率并无显著影响.The percentage of bending stems, bending position and vase life of 5 cut gerbera ( Gerbera jamesonii Bolus) cuhivars ( ' Hanwang' , ' Autumn' , ' Folailons' , ' Hongyan' and ' Darobell' ) was investigated, and it was found that the percentage of bending stems was different among the cultivars from 22.50% to 86.25%. Vase lives of all 5 cultivars varied a lot, ' Darobell' is the longest (8. 1 d) , and 'Hongyan' is the shortest (5.6 d). Additionally, more than 70% bending position of all 5 cuhivars were located in the stem segments between 6 - 12 cm below the flower head. Further studies with ' Au- tumn' on the effects of different factors ( including the angle between stem and horizontal, stem length, water detached time and the light treatment time) on the percentage of bending stems were conducted, which showed that the smaller the angle between stem and horizontal, the higher percentage of bending stems. However, the effects of stem length, the time without holding in water, and the light time on the percentage of bending stems were not significant.

关 键 词:非洲菊(Gerbera jamesonii Bolus) 切花 弯茎 瓶插 

分 类 号:S682[农业科学—观赏园艺]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象