CPE工艺改良刍议  

Discussion on Modification of CPE Process

作　　者：李群[1] 

机构地区：[1]天津钢管集团股份有限公司,天津300301

出　　处：《钢管》2015年第5期71-73,共3页Steel Pipe

摘　　要：介绍了目前CPE机组的主要工序,提出了卡环(挡叉)在线脱棒、行星松棒机在线松棒、脱管机离线脱管、用四辊辊模替代三辊辊模,以及旋压加工缩口部位减少切头损失的工艺改良设想。分析认为:实现在线脱/松棒,可缩短工艺流程、提高荒管温度、延长芯棒使用寿命;而用四辊辊模替代三辊辊模,可使定(减)径后的钢管由"内六方"变为"内八方",从而改善钢管壁厚精度。Described here in the essay are the currently-used main operation steps of the CPE pipe mill. Relevant modification suggestions are put forward, including on-line mandrel extracting with a clasp （block fork） , on-line mandrel loosening by planetary mandrel loosening mill, off-line pipe extracting by extracting mill, replacing the 3-roll die with the 4-roll die, and pointing via spinning process to reduce metal loss from cropping, etc. Relevant analysis leads to the following conclusion. Thanks to the on-line mandrel extracting/loosening operation steps, the manufacturing process flow will be shortened, the shell temperature raised, and the mandrel service span expanded, while due to replacement of the 3-roll die with the 4-roll die, the inner profile of the pipe as sized （reduced） will be turned from ＂the hexagonal＂ into ＂the octagonal＂, and thus the pipe＇ s wall thickness accuracy will be improved.

关 键 词：钢管 CPE工艺 卡环 在线脱棒 离线脱棒 行星轧机 CPE头 

分 类 号：TG335.71[金属学及工艺—金属压力加工]