无氰碱性镀锌故障排除6例  

Troubleshooting of six cases in cyanide-free alkaline zinc electroplating

作　　者：张小勇 李文绪 张雄 韩秀台 刘新伟 高长奇 

机构地区：[1]河南北方星光机电有限责任公司,河南邓州474150

出　　处：《电镀与涂饰》2015年第20期1184-1190,共7页Electroplating & Finishing

摘　　要：列举了6例无氰碱性镀锌故障,详细地介绍了每个故障的原因分析过程和解决措施。指出很多镀锌故障的产生都与电镀车间管理不善和工件本身的缺陷有关,实际生产中除了要控制好镀锌工艺参数和操作过程,还应重视车间管理和基体材料的质量。Six problems occurring in cyanide-free alkaline zinc electroplating were described. Their reasons were analyzed and countermeasures were introduced. It is indicated that many zinc electroplating faults may be caused by poor workshop management and intrinsic defects of workpiece. Not only the process parameters and operation of zinc electroplating process should be controlled well, but also the workshop management and quality ofsubstrates should be taken into account thoroughly.

关 键 词：故障排除 碱性镀锌 工艺管理 

分 类 号：TQ153.15[化学工程—电化学工业]