检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:祖国胤[1] 杜鹏[1] 宋洪全[1] 孙世亮[1]
机构地区:[1]东北大学材料与冶金学院,辽宁沈阳110819
出 处:《东北大学学报(自然科学版)》2015年第10期1422-1425,1430,共5页Journal of Northeastern University(Natural Science)
基 金:国家自然科学基金资助项目(U1332110)
摘 要:采用表面覆盖剂及氩气保护的熔炼方法制备了Mg-5Li-x Y(x=0,1,2,3,4)合金,研究了稀土元素Y对挤压态Mg-5Li合金的显微组织及力学性能的影响.研究结果表明,Mg-5Li合金中的Y元素主要是以稀土化合物Mg24Y5的形式存在于合金中;挤压变形后,合金发生了明显的动态再结晶,出现了大量的等轴晶,弥散分布的Mg24Y5相阻碍了动态再结晶过程中的晶粒长大,晶粒明显细化.挤压态Mg-5Li-3Y合金获得了优异的力学性能,其抗拉强度和断裂伸长率分别达到了231.63 MPa和9.35%,合金断裂方式主要为韧性断裂.With the protection of surface covering agents and argon protection,the Mg-5Li-x Y (x =0,1 ,2,3,4)alloys were prepared by conventional casting methods.The effects of rare earth on microstructure and mechanical properties of the as-extruded alloys were investigated.The results showed that the RE compound Mg24 Y5 generated after adding Y into the Mg-5Li alloy.The dynamic recrystallization arose during the hot extrusion process,leading to a large number of equiaxed grains appeared.The dispersive distribution of Mg24 Y5 phase hindered the growth of the grains during the dynamic recrystallization,which led to the grain refinement.The as-extruded Mg-5Li-3Y alloy achieved the best mechanical property:the tensile strength and elongation reached up to 231.63 MPa and 9.35%,respectively.The fracture mode of the alloy is mainly ductile fracture.
关 键 词:镁锂合金 稀土 Y 挤压变形 显微组织 力学性能
分 类 号:TG146.2[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.33