基于RapidIO控制符产生单元设计与实现  

Design and realization of the control symbols module based on Rapid IO specification

作　　者：冯龙辉 张兴明[1] 杨镇西[1] 李沛杰[1] 汪欣 

机构地区：[1]国家数字交换系统工程技术研究中心,河南郑州450002 [2]珠海高凌有限公司,河南郑州450002

出　　处：《电子技术应用》2015年第11期48-50,共3页Application of Electronic Technique

摘　　要：针对Rapid IO_2.2协议进行开发,设计并实现了该协议的控制符产生单元。本设计将控制符根据不同的功能字段拆分,采用流水线设计的方法将各个字段内部分别流水产生,最终并行实现。仿真结果表明,本设计在Rapid IO_2.2规范下,可以实现正确快速产生控制符的功能,并且能够连续产生不同的控制符。This paper designs and realizes the control symbols module based on the RapidIO_2.2 specification. Using the method of pipeline, the control symbol is decomposed and created according to the functions of different fields, which can be combined parallelly in the end. The simulation results show that under the RapidIO_2.2 specification our design can create the right control symbols rapidly, and can also create different control symbols continuously.

关 键 词：RAPID IO 控制符 流水线 并行 

分 类 号：TN911[电子电信—通信与信息系统]