检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]大连理工大学化工机械学院,辽宁大连116024
出 处:《应用科技》2015年第5期67-71,共5页Applied Science and Technology
基 金:国家自然科学基金资助项目(21376045)
摘 要:为了研究超临界液化天然气管内换热特性,使用甲烷替代液化天然气,对超临界甲烷在水平管内的对流换热情况进行了数值研究。通过改变甲烷的进口速度、换热管壁面温度和压力,得到超临界甲烷在管内的换热特性。结果表明,在临界点处表面传热系数出现峰值,表明临界点处有利于换热。速度的改变对表面传热系数影响很大,随着进口速度的增大,表面传热系数变大;壁温对传热系数影响较小,随着壁温升高表面传热系数略有下降;压力对传热系数影响与临界温度有关,当流体温度低于临界温度时,随着压力的升高表面传热系数变小,但当温度高于临界温度时,随着压力的升高表面传热系数变大。In order to study the supercritical liquefied natural gas (LNG) heat transfer characteristics in tubes,methane is used herein to replace LNG to investigate the numerical simulation of convective heat transfer of super-critical methane in a horizontal tube. The heat transfer characteristics of methane under supercritical pressure isfound out by changing the inlet velocity, wall temperature of the tube and pressure. The results show that the sur-face heat transfer coefficient has a peak value at the critical point, which demonstrates that it is beneficial to heattransfer under supercritical condition. The influence of inlet velocity on the heat transfer coefficient is significant,the surface heat transfer coefficient increases with the increase of inlet velocity. The wall temperature has a little in-fluence on the heat transfer coefficient ; with the increase of wall temperature, the heat transfer coefficient decreasesslightly. The influence of pressure on the heat transfer coefficient is related to critical temperature. When the fluidtemperature is below the critical temperature, the surface heat transfer coefficient decreases with the increase ofpressure, but when the temperature is higher than the critical temperature, the heat transfer coefficient increaseswith the increase of pressure.
关 键 词:数值模拟 超临界甲烷 对流传热 传热系数 水平圆管
分 类 号:TK01[动力工程及工程热物理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117