棉织物颜料印花工艺条件对牢度的影响及产品性能评价  

The Influences of Pigment Printing Process on Cotton Fabric Fastness and Performance Evaluation of the Printed Products

作　　者：陈一飞[1] 

机构地区：[1]嘉兴职业技术学院,浙江嘉兴314036

出　　处：《纺织科技进展》2015年第5期57-61,共5页Progress in Textile Science & Technology

基　　金：嘉兴市科技局科研项目(2014AY11017)

摘　　要：通过颜料用量、黏合剂APF-101用量、牢度增进剂MCG-2用量、焙烘温度、焙烘时间等工艺参数的试验并测试了湿摩擦色牢度的等级。得出最佳的工艺是黏合剂APF-101的用量控制在20%,MCG-2可视颜料的用量情况而定。在颜料用量4%以上时,MCG-2用量以2%~4%为宜;颜料用量小于4%时,MCG-2用量以0~2%为宜。适宜的焙烘温度和时间为温度140℃、时间2min。The rubbing fastness of printed fabric was tested through the process parameters experiments.The optimal printed process was dosage of adhesive APF-101 20% and the dosage of the MCG-2changed with pigments.The dosage of MCG-2was suit for 2%~4% when the paint consumption more than 4%,and the dosage of MCG-2was suit for 0~2% when the paint consumption less than 4%.The proper curing temperature and time was 140 ℃for 2min.

关 键 词：颜料印花 工艺条件 印花牢度 性能评价 

分 类 号：TS194.4[轻工技术与工程—纺织化学与染整工程]