检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]云南电网有限责任公司电力科学研究院,昆明650217 [2]长沙理工大学电气与信息工程学院,长沙410114
出 处:《低温工程》2015年第5期49-52,57,共5页Cryogenics
基 金:国家自然科学基金青年基金项目(51407013);云南电网公司2014年科技项目
摘 要:用于超导设备的薄膜型绝缘材料绕包于导体时往往承受一定的绕包张力,需要研究薄膜型绝缘材料在液氮环境中拉伸状态下的冲击绝缘强度。通过设计的波拉拉伸击穿测试系统,对聚酰亚胺、聚丙烯层压纸和聚四氟乙烯三种薄膜在液氮中拉伸状态下的冲击绝缘强度进行了测量,并通过Weibull概率分布的方法对测试结果进行了处理。结果发现随拉伸应力的增加,3种材料的冲击绝缘强度均在一定幅度内随之下降。所得结果可为超导电力装置的绝缘设计提供基础数据。The dielectric sheets used for superconducting devices usually endure several lapping tension when lapped on the conductor. So the impulse dielectric strengths of dielectric sheets under tension status in liquid nitrogen was be studied. A special electrode system was designed,the impulse dielectric strengths of polyimide,polypropylene laminated paper( PPLP) and polytetrafluoroethylene( PTFE) films under tension status in liquid nitrogen are tested,then the tested data are processed by the method of Weibull probability plot. As a result,the impulse dielectric strengths of three materials all decreased in a small range as the tensile stresses increased. The results could provide data base for the insulation design of superconducting devices.
关 键 词:液氮环境 冲击绝缘强度 薄膜型绝缘材料 拉伸状态
分 类 号:TB663[一般工业技术—制冷工程] TM215.3[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38