检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:马浩[1] 陈铁军[1,2] 黄献宝[1] 苏涛[1] 屈万刚
机构地区:[1]武汉科技大学资源与环境工程学院,湖北武汉430081 [2]冶金矿产资源高效利用与造块湖北省重点实验室,湖北武汉430081
出 处:《矿冶工程》2015年第5期39-41,45,共4页Mining and Metallurgical Engineering
摘 要:以甘肃地区镜铁矿粉矿为原料,采用磁化焙烧-弱磁选工艺,研究了焙烧温度、焙烧时间、还原剂用量、磨矿细度、磁场强度等对磁选效果的影响。结果表明,在煤粉用量2%、焙烧温度800℃、焙烧时间60 min条件下焙烧,再在磨矿细度-0.074 mm粒级占85.36%、磁场强度92.16 k A/m条件下磁选,可得到品位为54.95%、回收率为88.92%的弱磁选精矿。A flowsheet of magnetizing roasting-low intensity magnetic separation (LIMS) was adopted to treat a fine specularite ore from Gansu, and the influence of processing parameters including roasting temperature, roasting time, coal dosage, grinding fineness and magnetic field intensity on separation efficiency was investigated. The results show that with coal powder dosage of 2% and roasting process at 800 ℃ for 60 min,with grinding fineness of -0.074 mm 85.36% and beneficiation at a magnetic field intensity of 92.16 kA/m, a LIMS iron concentrate with iron grade and recovery of 54.95% and 88.92%, respectively, can be prepared.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.158