蛇形通道浇注法制备半固态ZL101铝合金浆料  

Preparation of Semi-solid ZL101Al Alloy Slurry by Serpentine Channel

作　　者：程书建 赵宇宏[1] 侯华[1] 靳玉春[1] 王冰[1] 吴金珂 

机构地区：[1]中北大学材料科学与工程学院

出　　处：《特种铸造及有色合金》2015年第10期1067-1069,共3页Special Casting & Nonferrous Alloys

基　　金：科技部国际科技合作项目(2011DFA50520;2014DFA50320);国家自然科学基金资助项目(51204147;51274175);山西省国际科技合作项目(2013081017;2012081013);山西省回国留学人员科研资助项目(2013-81)

摘　　要：采用蛇形通道浇注法制备半固态ZL101铝合金浆料,研究了浇注温度、弯道数量、冷却方式对半固态浆料组织的影响。结果表明,浇注温度在640~680℃范围时可获得理想的半固态ZL101铝合金浆料,其组织随浇注温度的降低,由蔷薇状向近球状或球状组织演变。在相同浇注温度下,弯道数量增加,可以改善初生α-Al晶粒的形貌,降低晶粒尺寸。弯道内的合金熔体具有＂自搅拌＂作用,使初生晶核演变为球状或近球状晶粒。The semi-solid slurry of ZL101Al-alloy was prepared by serpentine channel,and influences of pouring temperature,the number of curves and cooling ways on the microstructure of semi-solid ZL101 aluminum alloy were investigated.The results show that the satisfied semi-solid slurry of ZL101 aluminum alloy is prepared with pouring at 640℃to 680℃.The morphology of primaryα-Al grains is transformed from rosette to spheroid with the decrease of pouring temperature.At the given pouring temperature,increase of number of curves can improve the morphology of the primaryα-Al grains and decrease the grain size.The alloy melt exhibits the effect of＂self-stirring＂in the serpentine channel,which can make the primary nuclei gradually evolves into spherical and near-spherical grains.

关 键 词：ZL101铝合金 半固态 浆料 蛇形通道 

分 类 号：TG292[金属学及工艺—铸造]