微量碱对水性聚氨酯合成的影响  

Influence of trace alkali on synthesis of waterborne polyurethane

作　　者：赵丽[1] 黄兵[1] 曹刚[2] 杨华新 林中祥[1] 

机构地区：[1]南京林业大学化学工程学院,江苏南京210037 [2]南京夜视丽精细化工有限责任公司,江苏南京210037

出　　处：《中国胶粘剂》2015年第10期16-18,26,共4页China Adhesives

摘　　要：针对WPU(水性聚氨酯)在中试生产中所出现的凝胶现象,以TDI(甲苯二异氰酸酯)、聚酯二元醇、DMPA(二羟甲基丙酸)、BDO(1,4-丁二醇)和TEA(三乙胺)等为主要原料,探讨了微量工业用碱[如Na OH(氢氧化钠)、KOH(氢氧化钾)、Na HCO3(碳酸氢钠)和TEA等]对WPU合成的影响。研究结果表明:当30 g聚酯二元醇中分别加入4.32μg Na OH、21.20μg KOH、26.20μg Na HCO3或760.00μg TEA时,均会导致合成WPU过程中出现凝胶现象;TEA掺量对WPU粒径的影响较小,KOH、Na HCO3掺量的增加使WPU粒径略有增大。Aim at the gel phenomenon of WPU （waterborne polyurethane） in pilot scale production, the influences of trace industrial alkalis[such as NaOH （sodium hydroxide）, KOH （potassium hydroxide）, NaHCO3 （sodium bicarbonate） and TEA（triethylamine）] on WPU＇s synthesis were discussed when TDI（toluene diisocynate）, polyester diol, DMPA （dimethylol propanoic acid）, BDO （1,4-butanediol） and TEA were used as main raw materials. The research results showed that it would all cause gel phenomenon in process of WPU＇ s synthesis when the NaOH, KOH, NaHCO3 and TEA contents were 4.32,21.20,26.20,760.00 μg respectively in 30 g polyester diol. The influence of TEA contents on WPU＇ s particle size was less, but the WPU＇ s particle size was slightly increased with increasing KOH or NaHCO3 contents.

关 键 词：水性聚氨酯 甲苯二异氰酸酯 凝胶 微量碱 

分 类 号：TQ323.8[化学工程—合成树脂塑料工业]