Selective esterification of glycerol with acetic acid to diacetin using antimony pentoxide as reusable catalyst  

作　　者：Wenfei Hu Yan Zhang Yizheng Huang Jiaxi Wang Jin Gao Jie Xu 

机构地区：[1]School of Chemical Engineering, Hebei University of Technology [2]State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian National Laboratory for Clean Energy [3]School of Chemical Engineering and Technology, Tianjin University

出　　处：《Journal of Energy Chemistry》2015年第5期632-636,共5页能源化学（英文版）

基　　金：supported by the"Strategic Priority Research Program-Climate Change:Carbon Budget and Related Issues"of the Chinese Academy of Sciences(XDA050102);the National Natural Science Foundation of China(21233008)

摘　　要：Glycerol can be obtained as a by-product during biodiesel manufacture. It is important to convert glycerol to value-added products. Glycerol esterification with acetic acid is one of the most promising approaches for glycerol utilization. It is usually difficult to obtain diacetin with good activity and selectivity. In this work, glycerol esterification with acetic acid over different metal oxides, such as Bi2O3, Sb2O3, SnO2, TiO2, Nb2O5 and Sb2O5, was investigated. It was found that in the six investigated metal oxides, only Sb205 resulted in good activity and selectivity to diacetin. Under the optimized conditions, the glycerol conversion reached 96.8%, and the selectivity to diacetin reached 54.2%, while the selectivity to monoacetin and triacetin was 33.2% and 12.6%, respectively. The catalysts were characterized with FT-IR spectra of adsorbed pyridine, which indicated that in the six investigated metal oxides, only Sb2O5 possessed Bronsted acid sites strong enough to protonate adsorbed pyridine. The good catalytic activity and selectivity to diacetin might be mainly attributable to the Bronsted acid sites of Sb2O5. Reusability tests showed that with 5b205 as catalyst, after six reaction cycles, no significant change in the glycerol conversion and the selectivity to diacetin was observed.Glycerol can be obtained as a by-product during biodiesel manufacture. It is important to convert glycerol to value-added products. Glycerol esterification with acetic acid is one of the most promising approaches for glycerol utilization. It is usually difficult to obtain diacetin with good activity and selectivity. In this work, glycerol esterification with acetic acid over different metal oxides, such as Bi2O3, Sb2O3, SnO2, TiO2, Nb2O5 and Sb2O5, was investigated. It was found that in the six investigated metal oxides, only Sb205 resulted in good activity and selectivity to diacetin. Under the optimized conditions, the glycerol conversion reached 96.8%, and the selectivity to diacetin reached 54.2%, while the selectivity to monoacetin and triacetin was 33.2% and 12.6%, respectively. The catalysts were characterized with FT-IR spectra of adsorbed pyridine, which indicated that in the six investigated metal oxides, only Sb2O5 possessed Bronsted acid sites strong enough to protonate adsorbed pyridine. The good catalytic activity and selectivity to diacetin might be mainly attributable to the Bronsted acid sites of Sb2O5. Reusability tests showed that with 5b205 as catalyst, after six reaction cycles, no significant change in the glycerol conversion and the selectivity to diacetin was observed.

关 键 词：GlycerolAcetic acid Esterification Diacetin Antimony pentoxide Catalysis 

分 类 号：TQ223.163[化学工程—有机化工] O643.36[理学—物理化学]