横向剪切干涉纯背景条纹模拟  

Background Fringe Simulation of Lateral Shearing Interferometry

作　　者：代金梅 朱进容[1,2] 姚育成[1] 成纯富[1] 

机构地区：[1]湖北工业大学太阳能高效利用湖北省协同创新中心,湖北武汉430068 [2]武汉理工大学材料科学与工程学院,湖北武汉430070

出　　处：《湖北工业大学学报》2015年第5期42-44,76,共4页Journal of Hubei University of Technology

基　　金：太阳能高效利用湖北省协同创新中心开放基金(HBSKFZD2014015);湖北省教育厅科学技术研究计划青年人才项目(Q20151409)

摘　　要：横向剪切干涉纯背景条纹因来源于剪切前后波面在重叠区的干涉,而受光学系统像差和附加相位的调制。根据横向剪切的成像理论,利用Matlab软件模拟纯背景条纹,分析离焦像差、球差等光学系统像差和附加相位差的影响。研究结果表明:条纹的密集度和形状受像差的影响很大,随附加相位差呈周期性分布。纯背景条纹的模拟与实验结果基本一致,对比这两种条纹,可调试实际光学系统以获得适宜的像差系数,利于干涉图的数据提取。An interferogram is generated by the wavefront and its laterally shifted wavefront in the overlap area using lateral shearing interferometry. The background fringes obtained are related to the optical aberration. Based on the imaging theory, the background fringes were simulated by Matlab software. Defocus, spherical aberration and the extra phase difference were analyzed. The results indicated that the density and the shape of the fringes were affected greatly by the optical aberrations and periodic with the extra phase difference. The simulated background fringes are similar to the experimental one. After comparing this two results, the appropriate optical aberrations can be obtained by adapting the actual optical system is beneficial to the data extraction.

关 键 词：横向剪切 干涉条纹 光学像差 

分 类 号：TK124[动力工程及工程热物理—工程热物理] TK311[动力工程及工程热物理—热能工程]