抛物线型旋流器分离特性的数值模拟和试验研究  

Numerical Simulation and Experimental Study on the Separation Performance of Parabolic Hydrocyclone

作　　者：刘培坤[1,2] 姜兰越 杨兴华[2] 张悦刊[2] 徐庆芝[2] 

机构地区：[1]国土资源部金矿成矿过程与资源利用重点实验室山东省金属矿产成矿地质过程与资源利用重点实验室,山东济南250013 [2]山东科技大学,山东青岛266590

出　　处：《流体机械》2015年第10期1-6,共6页Fluid Machinery

基　　金：国土资源部金矿过程与资源利用重点实验室;山东省金属矿产成矿地质过程与资源利用重点实验室开放课题(2013010);山东省科技发展计划项目(2014GGB019G3)

摘　　要：针对水力旋流器易出现底流夹细的问题,提出并设计了一种抛物线型旋流器,利用模拟软件Fluent 14.5对比分析了传统型和抛物线型旋流器的内部流场和分离性能,并进行了试验研究。模拟结果表明,与传统旋流器相比,抛物线型旋流器内部流场更加稳定,有效避免了因流场紊乱造成的粗细颗粒混杂。进一步的试验研究显示,抛物线型旋流器底流中细颗粒的含量明显降低,分离粒度由30μm增加到49μm,陡度指数由0.13增加到0.2,表明旋流器的分离精度提高,底流夹细现象得到明显改善。In order to prevent the underflow product of a hydrocyclone from mixing with fine particles,a kind of parabolic hydrocyclone is proposed and designed.The simulation software Fluent 14.5 is used to simulate the internal flow field and separation performance of the traditional and parabolic hydrocyclone,then the experimental study is carried out The simulation results show that,the internal flow field of the parabolic hydrocyclone is more stable than that of the traditional one,which effectively avoids the mixture of the coarse and fine particles caused by the flow field disturbance.Further experimental results also demonstrate that,the cumulative percentage of fine particles in the underflow product decreases obviously.Moreover,the cut size increases from 30μm to 49μm and the steepness index increases from 0.13 to 0.2,which proves that the separation accuracy can be improved and the fine particles mixed in the underflow can be reduced obviously.

关 键 词：抛物线型旋流器 底流 分离 精度 

分 类 号：TH138.8[机械工程—机械制造及自动化] TQ051.8[化学工程]