基于Moldflow和正交试验设计的注射成型工艺参数的优化  

Optimization of Injection Molding Process Parameters Based on Moldflow and Orthogonal Experimental Design

作　　者：林启权[1] 杨雪峰[1] 董文正[1] 

机构地区：[1]湘潭大学机械工程学院,湖南湘潭411105

出　　处：《中国塑料》2015年第10期73-77,共5页China Plastics

基　　金：国际科技合作专项(2012DFG70640);国家自然科学基金(51175445)

摘　　要：以保护盖为研究对象,采用Moldflow软件对其注射成型过程进行了数值模拟,结合正交试验设计方法,研究了熔体温度、模具表面温度、成型时间、保压时间与保压压力5个工艺因素对塑件体积收缩率和翘曲变形量的影响。通过对模拟结果的信噪比分析和方差分析,获得了各因素的最佳水平,进而获得了最优工艺参数组合。对最优组合工艺参数的注射成型进行模拟试验,验证了采用正交试验设计优化注射成型工艺参数的有效性。Taking protective covers as an example, Moldflow software was applied to simulate the injection molding process. Orthogonal experiments were conducted to study the influence of five process parameters on volume shrinkage and warpage： melt temperature, mold surface temperature, injection time, holding pressure time, and holding pressure. By analyzing the signalto-noise ratio and variance of the results, the best level of each factor was obtained, and then the optimal combination of process parameters was acquired.

关 键 词：保护盖 MOLDFLOW 正交试验设计 注射成型 优化 

分 类 号：TQ320.662[化学工程—合成树脂塑料工业]