HPLC法测定注射用头孢孟多酯钠中有关物质  

Determination of related substances in Cefamandole Nafate for Injection by HPLC

作　　者：杜淑朋 周天舒[2] 宋维锋 刘贵池 丁立秀[1] 牛锋[4] 

机构地区：[1]石药集团中诺药业(石家庄)有限公司,河北石家庄050000 [2]石药集团中奇制药技术(石家庄)有限公司,河北石家庄050000 [3]华药集团爱诺有限公司,河北石家庄050000 [4]石药集团恩必普药业有限公司,河北石家庄050000

出　　处：《现代药物与临床》2015年第10期1204-1207,共4页Drugs & Clinic

摘　　要：目的建立HPLC对注射用头孢孟多酯钠中有关物质进行测定的方法。方法菲罗门Luna C18（2）色谱柱（250 mm×4.6 mm,5μm）,流动相为1%三乙胺溶液（用磷酸调节p H值至2.5）–乙腈（76∶24）,体积流量为1.5 m L/min,检测波长为254 nm,柱温为40℃,进样量为20μL。采用杂质对照品法外标法计算杂质D,采用加校正因子的主成分自身对照法计算杂质A、E、C。结果杂质D为主要降解产物,定量限为0.01%,在0.02~0.20μg与峰面积线性关系良好。杂质A、E、C的校正因子分别为1.14、1.25、1.14,检测限分别为0.004%、0.02%、0.04%。结论杂质D、A、E、C作为特定杂质应订入质量标准,可以更好地控制注射用头孢孟多酯钠中有关物质。Objective To establish an HPLC method for determination of related substances in Cefamandole Nafate for injection. Methods HPLC method was adopted. The determination was performed on Phenomenex C18（2） column（250 mm × 4.6 mm, 5 μm）, mobile phase was 1% triethylamine solution（phosphoric acid adjusted p H to 2.5）- acetonitrile（76∶24） at a flow rate of 1.5 m L/min. The detection wavelength was set at 254 nm, the column temperature was at 40 ℃, and the injection volume was 20 μL. Impurity D was determined by external standard method, and impurity A, E, and C were determined by principal component self control method with correction factor. Results Impurity D was the main degradation products, the quantitative limits was 0.01%, and there had good linearity in the ranges of 0.02 — 0.20 μg/m L. The correction factors of impurity A, E and C were 1.14, 1.25, and 1.14, respectively, and the detection limits were 0.004%, 0.02%, and 0.04%, respectively. Conclusion Impurity D, A, E, and C should be adopted into the quality standard as specific impurities which can better control the related substances in Cefamandole Nafate for injection.

关 键 词：注射用头孢孟多酯钠 有关物质 高效液相色谱 

分 类 号：R927.2[医药卫生—药学]