六辊轧机非对称轧制过程板形模型与控制应用技术(Ⅱ)--六辊轧机非对称轧制过程中板形分布规律及其控制技术  

Research of shape model and control application based on the mechanism in six-high mill asymmetric rolling process(Ⅱ)——Research of shape distribution law and control technology on the mechanism in six-high mill asymmetric rolling process

作　　者：白振华[1] 刘亚星[1] 冯彬[1] 陈双玉[1] 王亚军[1] 陈光[1,2] 

机构地区：[1]燕山大学国家冷轧板带装备及工艺工程技术研究中心、亚稳材料制备技术与科学国家重点实验室,秦皇岛066004 [2]上海梅山钢铁股份有限公司冷轧厂,南京210039

出　　处：《塑性工程学报》2015年第5期94-99,共6页Journal of Plasticity Engineering

基　　金：国家科技支撑计划资助项目(2011BAF15B02)

摘　　要：针对六辊轧机工作过程中存在的带材跑偏、工作辊与中间辊及支撑辊因磨损不对称等因素而引起的实际辊型不对称、来料板形及断面形状呈不对称分布等非对称轧制问题,以某冷轧厂1220平整机组为研究对象,定量分析了带材跑偏、来料断面形状不对称、工作辊辊型不对称、中间辊辊型不对称和支撑辊辊型不对称等典型非对称轧制情况下轧机的出口板形分布规律,并在此基础上研究了非对称轧制过程中的板形控制策略,提出了相应的板形控制技术,并将其应用到生产实践,编制出一套《1220六辊平整机组非对称轧制过程板形控制软件》,利用该软件定量分析了相关技术的板形控制效果,为机组的设备改造以及最终解决非对称轧制所带来的板形问题奠定了坚实的基础。The problems of asymmetric rolling including asymmetric roll shape,asymmetric strip shape and section shape distribution are caused by the factors such as strip wondering,asymmetric wearing of work roll,middle roll and back-up roll in the working process of six-high mill roll.For these problems,taking the 1220 temper mill group as the object,the distribution law of the exit shape in the typical asymmetric cases including strip wondering,asymmetric section shape,asymmetric roll shape of work roll,middle roll and back-up roll was quantitatively analyzed.Then the strategy of the shape control in the process of asymmetric rolling was studied,the corresponding technology was put forward and applied into practical production,and the program of 1220six-high temper roll group shape control in the process of asymmetric rolling software was established.Using this software,the shape control effect about related technology was quantitatively analyzed,which lays the foundation for the equipment modification and the plate shape problem because of the asymmetric rolling.

关 键 词：六辊轧机 非对称轧制 跑偏 板形控制 

分 类 号：TG335.19[金属学及工艺—金属压力加工] TG335.56