多弹丸时空散布参数测试方法仿真研究  

Simulation of Measuring Method for Space-time Distributed Parameters of Multiple Projectiles

作　　者：武江鹏 宋萍[1] 郝创博[1] 李志达[1] 

机构地区：[1]北京理工大学机电学院,北京100081

出　　处：《兵工学报》2015年第10期1967-1974,共8页Acta Armamentarii

基　　金：国防基础科研项目(2013年)

摘　　要：针对高射速武器多弹丸同时着靶时立靶密集度无法测量的情况,提出一种基于双CCD靶面的多弹丸时空散布参数测试方法。两个CCD靶面在竖直方向上互成一定角度,当多发弹丸同时到达靶面Ⅰ时,非水平方向上的并行弹丸由于飞行距离不同而在靶面Ⅱ中的成像时间分离,水平方向上的并行弹丸按照两个线阵CCD相机上弹丸成像像素位置顺序匹配原则进行像素配对而消除虚假目标的影响。通过双靶面对多弹丸的坐标投影和时空匹配,解算出带弹序的多弹丸着靶坐标、飞行速度。经仿真验证,测试方法能够有效解决多弹丸齐至而单个CCD靶面无法剔除假目标的问题。For the measuring difficulty of the vertical target dispersion when multiple projectiles impact simultaneously,a measuring method for the space-time parameters of multiple projectiles is proposed by using two CCD vertical targets. There is an angle between two CCD target surfaces in vertical direction.When several projectiles arrive at target surface Ⅰ at the same time,the projectiles in the non-horizontal direction are separated on target surface Ⅱ because they fly over different distance between two CCD targets. The projectiles in the horizontal direction cannot be separated and are matched in accordance with the principle of pixels order matching. The impact coordinates of multiple projectiles with sequence and flight velocity can be calculated through the coordinates projection and the temporal-spatial matching from Target Ⅱ to Target Ⅰ. The simulation result proves that the proposed method can effectively address the issue of eliminating the false projectiles on single CCD target when multiple projectiles impact all at once.

关 键 词：兵器科学与技术 高射速武器 双CCD立靶 多目标时空匹配 立靶密集度 

分 类 号：TJ012.3[兵器科学与技术—兵器发射理论与技术]