检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]School of Astronautics,Harbin Institute of Technology
出 处:《Journal of Harbin Institute of Technology(New Series)》2015年第5期46-54,共9页哈尔滨工业大学学报(英文版)
基 金:Sponsored by the National Natural Science Foundation of China(Grant No.11302058)
摘 要:In order to clarify the effects of support structure on a dual-rotor machine,a dynamic model is established which takes into consideration the contact force of ball bearing and the cubic stiffness of elastic support. Bearing clearance,Hertz contact between the ball and race and the varying compliance effect are included in the model of ball bearing. The system response is obtained through numerical integration method,and the vibration due to the periodic change of bearing stiffness is investigated. The motions of periodic,quasiperiodic and even chaotic are found when bearing clearance is used as control parameter to simulate the response of rotor system. The results reveal two typical routes to chaos: quasi-periodic bifurcation and intermittent bifurcation. Large cubic stiffness of elastic support may cause jump and hysteresis phenomena in resonance curve when rotors run at the critical-speed region. The modeling results acquired by numerical simulation will contribute to understanding and controlling of the nonlinear behaviors of the dual-rotor system.In order to clarify the effects of support structure on a dual-rotor machine,a dynamic model is established which takes into consideration the contact force of ball bearing and the cubic stiffness of elastic support. Bearing clearance,Hertz contact between the ball and race and the varying compliance effect are included in the model of ball bearing. The system response is obtained through numerical integration method,and the vibration due to the periodic change of bearing stiffness is investigated. The motions of periodic,quasiperiodic and even chaotic are found when bearing clearance is used as control parameter to simulate the response of rotor system. The results reveal two typical routes to chaos: quasi-periodic bifurcation and intermittent bifurcation. Large cubic stiffness of elastic support may cause jump and hysteresis phenomena in resonance curve when rotors run at the critical-speed region. The modeling results acquired by numerical simulation will contribute to understanding and controlling of the nonlinear behaviors of the dual-rotor system.
关 键 词:dual-rotor system ball bearing elastic support nonlinear dynamics BIFURCATION CHAOS
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.166