检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]沈阳工业大学信息科学与工程学院,辽宁沈阳110870
出 处:《仪表技术与传感器》2015年第10期107-110,共4页Instrument Technique and Sensor
基 金:十二五国家科技部支撑计划资助项目(2011BAK06B01-03);国家高技术研究发展计划863资助项目(2012AA040104);科技部国家重大仪表专项(2012YQ090175)
摘 要:针对钢板表面裂纹检测的问题,提出了交变电磁场的检测方法。研究了交变电磁场检测原理,建立了交变电磁场仿真模型,通过改变钢板表面裂纹深度等条件,分析计算了裂纹处磁场强度分布。对不同深度钢板裂纹的实验数据进行分析,实验结果表明,在相同实验条件下,随检测深度的增加,检测信号峰值增长正比于裂纹深度,检测最大深度为5 mm。For the problem that steel surface cracks was defected,alternating current field measurement was proposed. The principle of alternating current field measuremen was studied,a Comsol electromagnetic simulation model was set up and calculated by changing the conditions of the steel surface crack depth and magnetic field intensity distribution of defects were analyzed.According to the simulation results of the design experiments,under the same experimental conditions,with the increase of the depth of detection,the detection signal peak is proportional to the depth of the crack growth,the maximum detection depth is 5mm.
关 键 词:交变电磁场检测 钢板表面裂纹 磁感应强度 矩形激励线圈 趋肤效应
分 类 号:TG115.28[金属学及工艺—物理冶金]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249