红外显微物镜设计  

Design of Infrared Microscope Objectives

作　　者：徐思轶 李茂忠[1] 木锐[1] 刘福平 尹爽[1] 贾钰超 

机构地区：[1]昆明物理研究所,云南昆明650223 [2]云南北方驰宏光电有限公司,云南昆明650217

出　　处：《红外技术》2015年第11期938-942,共5页Infrared Technology

基　　金：云南省省院省校合作项目;编号:2014IB007

摘　　要：对红外显微光学系统进行了研究。根据光学系统设计指标，应用无限远校正方法和反向追迹的方法设计两款不同放大倍率的红外显微物镜。并给出了两款工作波段在8～12μm，放大倍率为1^×和3^×，工作距离均为25mm，物方线视场为20mm的透射式红外显微物镜的设计结果和公差分析。The paper discussed infrared microscopic optical system. According to the optical system design target, infinity correction method and the reverse tracing method were applied to design two different magnification IR microscope objectives. The design results and the analysis of tolerance of the two infrared microscopes were given, of which working band is 8-12 micron, working distance is 25 mm, the line view is 20 mm, and magnifications are 1^× and 3^× separately.

关 键 词：红外显微物镜 无限远校正 反向追迹 光学设计 

分 类 号：TH742[机械工程—光学工程]