某铜冶炼炉渣碎磨工艺设计方案比较  

Comparison of Design Scheme of Copper Smelting Slag Crushing and Grinding Process

作　　者：杨斌[1] 魏欣欣[1] 

机构地区：[1]中国瑞林工程技术有限公司,江西南昌330031

出　　处：《有色冶金设计与研究》2015年第5期1-3,共3页Nonferrous Metals Engineering & Research

基　　金：江西省科技支撑计划项目(项目编号:20132BBG70016)

摘　　要：针对某铜冶炼炉渣性质,对该炉渣选厂进行了详细的碎磨工艺设计方案比较,包括半自磨工艺和常规碎磨工艺。对比结果发现,两种方案费用现值非常接近,但基于半自磨工艺的多种优点,并结合已有渣选厂的生产实践,最终确定本渣选厂的碎磨工艺设计采用半自磨工艺流程。According to the characteristic of the copper smelting slag, the detailed comparison of crushing and grinding process design schemes is carried out for the slag concentrator, which includes the semi-autogenous grinding process and the conventional grinding process. It found from the comparison that the expense present values were approximate in the two schemes; however, based on the various advantages of semi-autogenous grinding process and combining with production practice of the existing slag processing plant, the semi-autogenous grinding process is finally adopted in this slag processing plant.

关 键 词：铜冶炼炉渣 碎磨工艺 半自磨工艺 常规碎磨工艺 方案比较 

分 类 号：TD92[矿业工程—选矿]