小直径铣刀高速铣削316L不锈钢的切削合力研究  

Study of Cutting Force of Small Diameter Cutter with High Speed Milling of 316L Stainless Steel

作　　者：阙燚彬[1,2] 

机构地区：[1]广西大学机械工程学院,广西南宁530004 [2]柳州职业技术学院机电工程系,广西柳州545006

出　　处：《机床与液压》2015年第21期156-159,共4页Machine Tool & Hydraulics

摘　　要：通过多因素正交试验,应用SPSS软件建立不锈钢小直径铣刀高速铣削316L不锈钢的最大切削合力回归经验公式,同时对回归模型进行显著性验证。最终得到对铣削参数的优化选择有一定的参考价值的分析结果。Multi-factor orthogonal experiment was carried out. SPSS software was applied to establish regression empirical formula for cutting force of small diameter stainless steel cutter with high speed milling of 316 l stainless steel,at the same time,the notable significance for the regression model was validated. Finally,the analysis of the results is obtained to have certain reference value to the optimization of milling parameters selection.

关 键 词：小直径铣刀 高速铣削 316L不锈钢 切削合力 经验公式 

分 类 号：TH16[机械工程—机械制造及自动化]