检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]同煤浙能麻家梁煤业有限责任公司,山西朔州市036000 [2]中国矿业大学力学与建筑工程学院,江苏徐州市221116
出 处:《矿业研究与开发》2015年第10期22-26,共5页Mining Research and Development
基 金:国家自然科学基金项目(51374201)
摘 要:以山西某矿CT101工作面为例,采用UDEC软件建立数值计算模型,得出了不同充实率下导水裂隙带的发育高度。当充实率从60%上升到80%时,导水裂隙带发育高度从27.1m减低至14m,减小了48%,表明增大充实率能有效减小导水裂隙带发育高度。用等价采高代入经验公式的计算结果与模拟结果基本一致,现场实测数据得出的注水漏失量图表明,在80%充实率下,钻孔垂直深度16.4 m为导水裂隙带发育高度位置。Based on the CT101 working face of a mine in Shanxi,the numerical calculation model was established by UDEC,and the developmental height of water-flowing fractured zone under different filling ratios was obtained.The height of water-flowing fractured zone decreased by 48%from 27.1 mto 14 m when the filling ratio increased from60%to 80%,which showed that increasing filling ratio can significantly decrease the height of water-flowing fractured zone.Substituting the equivalent mining height into an empirical formula,the calculated result was in agreement with the simulated result.The water leakage graph from field data showed that when the filling ratio was 80%,the vertical depth of borehole,equal to 16.4m,was the height of waterflowing fractured zone.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.3