一种金刚石绳锯串珠用CuFeCo胎体的烧结和力学性能研究  

Sintering and mechanical properties of CuFeCo matrix applied for bead

作　　者：王帅[1] 谢德龙[2] 吕智[1,2] 林峰[2] 潘晓毅[2] 秦海青[2] 

机构地区：[1]桂林理工大学材料科学与工程学院,桂林541004 [2]中国有色桂林矿产地质研究院广西超硬材料重点实验室/国家特种矿物材料工程技术研究中心,桂林541004

出　　处：《金刚石与磨料磨具工程》2015年第5期15-19,24,共6页Diamond & Abrasives Engineering

基　　金：广西区直科技型企业科研成果转化资金(2013-1-20);广西自然科学基金面上项目(2013GXNSFAA019320);广西科学研究与技术开发计划项目(桂科攻1348008-3);中色集团科技开发项目(2013KJJH11);桂林市科学研究与技术开发计划项目(20150105-1;20140104-4)

摘　　要：采用共沉淀法制备了一种CuFeCo预合金粉末,对粉末的物相组成和微观形貌进行了测试和分析。测试了不同烧结温度下烧结体的三点抗弯强度、磨损失重、硬度、致密度等性能。研究结果表明:在共沉淀还原的过程中,形成了Co3Fe7、CoFe15.7、FeCu4等合金化合物;制备的粉末多呈不规则状,颗粒较小且相互连接,表面疏松且比表面积较大,说明该粉末有较高的烧结活性;该粉末的最佳烧结温度为750℃,此烧结温度下烧结体的三点抗弯强度为1230MPa,硬度为92.5HRB,致密度为98%;相比传统配方,用该粉末作为串珠胎体黏结剂时,串珠的寿命和效率都有了一定的提高。Based on the co‐precipitation method , the CuFeCo based pre‐alloyed powder was manufactured . X‐ray diffractometry and scanning electron microscope were adopted to analyze the matrices′ phase composition and microstructure . Three point bending strength , weight loss , hardness and relative density of samples sintered at different temperatures were analyzed . Results showed that the metallic compound of Co3 Fe7 , CoFe15 .7 , FeCu4 had formed in the powder and that it could reduce the sinter temperature because of its loosen surface and more specific area . At a sintering temperature of 750 ℃ ,the bending strength of CuFeCo fetal body was 1230 MPa , the hardness of CuFeCo fetal body was 92 .5 HRB and the relative density was 98% .Compared with the traditional formula of bead matrix ,the new formula with CuFeCo powder inside had longer life and higher efficiency .

关 键 词：CuFeCo 烧结温度 力学性能 串珠胎体 

分 类 号：TQ164[化学工程—高温制品工业]