检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西安交通大学电气工程学院电力设备电气绝缘国家重点实验室,西安710049 [2]西安空间无线电技术研究所,西安710100
出 处:《物理学报》2015年第21期234-242,共9页Acta Physica Sinica
基 金:国家自然科学基金(批准号:51377124;51221005);高等学校全国优秀博士学位论文作者专项资金(批准号:201337);教育部新世纪优秀人才支持计划(批准号:NCET-13-0457);中央高校基本科研业务费专项资金(批准号:2012jdgz09);电力设备电气绝缘国家重点实验室(批准号:EIPE15313)资助的课题~~
摘 要:基于平均建模法并考虑到正极性输出罗(positive output super-lift Luo,POSL Luo)变换器中能量传输电容电压存在突变的事实,建立了POSL Luo变换器的改进平均模型,推导并分析了POSL Luo变换器输出电压对占空比的传递函数.建立了电压控制POSL Luo变换器的输出电压对基准电压的传递函数,分析了系统的稳定性.采用PSIM软件进行电路仿真以及设计硬件电路进行电路实验,以PSIM仿真结果和电路实验结果验证了模型的有效性和理论分析的正确性.研究结果表明:相比于POSL Luo变换器已有的平均模型,采用本文的改进平均模型可有效的分析POSL Luo变换器的特性及电压控制POSL Luo变换器的稳定性.Positive output super-lift(POSL) Luo converter, which has some particular good features: such as its power switch being grounded, high voltage gain and positive polarity output, is a good topology for overcoming the drawbacks of the conventional Buck and Boost converters to obtain high output voltage and power for satisfying the requirements in practical engineering. In this paper, based on the averaging method and taking into account the abrupt changing of the voltage across the energy-transferring capacitor, the improved reduced order averaged model and the corresponding small signal model of the POSL Luo converter are established, and its transfer function from the duty cycle to the output voltage is derived and analyzed. By combining the derived transfer function from the duty cycle to the output voltage of the POSL Luo converter, with that for the voltage compensator and that for the pulse width modalation(PWM)generator, the transfer function from the reference voltage to the output voltage of the voltage-mode controlled POSL Luo converter is also derived. And then, the stability of the voltage-mode controlled POSL Luo converter is identified by calculating the poles of its transfer function from the reference voltage to the output voltage, so the corresponding stability boundaries are obtained. The power electronic simulator(PSIM) software is applied to simulate the POSL Luo converter in time domain and frequency domain to preliminarily confirm the effectiveness of the established transfer function from the duty cycle to the output voltage of the POSL Luo converter, and to simulate the voltage-mode controlled POSL Luo converter to preliminarily verify the theoretical analysis about its stability. Finally, the hardware circuits for the POSL Luo converter and the voltage-mode controlled POSL Luo converter are designed, and the circuit experimental results in time domain from the digital oscilloscope and in frequency domain from the impedance/gainphase analyzer are presented for further validatio
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249