基于电阻型频率选择表面的宽带雷达超材料吸波体设计  

Design and fabrication of broadband radar metamaterial absorber based on the resistor FSS

作　　者：惠忆聪 王春齐[2] 黄小忠[2] 

机构地区：[1]中南大学物理与电子学院,长沙410073 [2]中南大学航空航天学院,长沙410073

出　　处：《物理学报》2015年第21期426-431,共6页Acta Physica Sinica

基　　金：国防预研究基金(批准号:51312040302);国家高技术研究发展计划(863计划)(批准号:2014AA7024034;2014AA7060403)资助的课题~~

摘　　要：将多边开缝式电阻型频率选择表面(frequency selective surface,FSS)与传统的磁性吸波材料(radar absorption materials,RAM)复合,提出了一种新型吸波体模型.在分析该模型材料结构和拓扑结构的基础上,得到等效电路模型;基于传输线理论获得该模型的反射率及输入阻抗.采用CST仿真软件对电阻型FSS与无电阻型FSS进行对比仿真,通过分析吸波效率,结果表明电阻型FSS在8.7 GHz附近具有更加优良的吸波性能,实物测试结果与仿真结果一致.同时FSS复合传统的磁性吸波材料RAM产生了拓频效果,在8—15GHz范围内起到全频段吸收.In this paper, a kind of composite radar absorption materials, consisting of polygonal and seamed resistor with frequency selective surface（FSS） and traditional magnetic radar absorption materials（RAM）, is presented. After analyzing such a material and its topological structure, we obtain the equivalent circuit model of this structure, and acquire the reflectivity and input impedance of such models on the basis of transmission line theory. By the application of CST（computer simulation technology）, we have made a comparison between structures with nonresistor and resistor FSS. The structure with resistor FSS has a dual-band whose bandwidths are 0.8 GHz from 8.4 to 9.2 GHz and 0.22 GHz from 11.5 GHz to 11.72 GHz with the reflectivity below-10 dB, respectively. The simulated reflection coefficient for the resistor FSS shows two resonant frequencies at 8.7 and 11.5 GHz which respectively make contribute to a higher absorbing peak reaching-24 d B and-23 d B. However, the nonresistor FSS does not have the absorption peak at8.7 GHz, and the absorption peak at 11.5 GHz reaches-20 d B, confirming the importance of resistors in improving absorption performance. We have observed which part of such a structure influences amost the bsorption by ascertaining power loss density in the absorbing structure. Based on the current distribution of the FSS, two different schemes of LC equivalent circuits can be modeled, at 8.7 GHz and 11.5 GHz, which can explain the anti-resonance and higher absorbing peak of resistor FSS. Moreover, due to the fact that the induced current increases significantly after adding resistors,we could see that the losses happen when the induced current flows through the resistors, Finally the usage of resistor could improve the absorptive performance of FSS at around 8.7 GHz, this result is coincident with that of simulation.In addition, the combination of resistor FSS and RAM can lead to a frequency-doubling effect, meaning that it has remarkable absorptive performance in the range of 8—15 GHz

关 键 词：电阻 频率选择表面 磁性材料 

分 类 号：TB34[一般工业技术—材料科学与工程] TN958[电子电信—信号与信息处理]