结构改进在提高阳极模品质中的应用  

Application of structural improvement in improving the quality of anodic mold

作　　者：朱宏学 施晓峰 黄斌 刘正耀 陈进军 

机构地区：[1]大冶有色机电设备修造有限公司,湖北黄石435000

出　　处：《中国铸造装备与技术》2015年第6期30-32,共3页China Foundry Machinery & Technology

摘　　要：在提高阳极模品质（即浇铜量）的系列改进活动中，对阳极模的使用工况、失效形式和铸件结构进行了分析，并且对铸件结构进行了改进。两阶段的改进过程中出现了确认无效措施，待定深入措施和确认有效措施等三类情况。最终，铸件结构改进配合阳极模品质提升的其它措施，一起促成每块阳极模浇铜量稳定达到260～280t的创纪录成果。Improving the quality of anode mold （ie pouring copper content） series of improvement activities, use of anode mold conditions, failure modes and casting structure is analyzed, and the casting structure has been improved.In the two phase of the improvement process, there are three kinds of cases, such as the confirmation of invalid measures, the pending further measures and the confirmation of effective measures. In the end, the casting structure improved with other measures to improve the quality of the anode mold, together with the results of the average 260 - 280 t/P. of the copper content in the anode.

关 键 词：阳极模 失效分析 结构改进 浇铜量 

分 类 号：TG24[金属学及工艺—铸造]