协同体制被动毫米波成像系统天线阵布局优化  

Antenna array layout optimization of collaborative passive millimeter-wave imaging system

作　　者：尚晓舟 孙鹏[1] 胡岸勇[1] 苗俊刚[1] 

机构地区：[1]北京航空航天大学电子信息工程学院,北京100191

出　　处：《北京航空航天大学学报》2015年第10期1842-1847,共6页Journal of Beijing University of Aeronautics and Astronautics

基　　金：中央高校基本科研业务费专项资金(30344001)

摘　　要：针对人体安检应用中的高分辨率实时成像需求,分析了被动毫米波成像系统中相控阵体制与综合孔径体制的关系,结合两者优势提出了一种协同体制被动毫米波成像系统.针对水平方向相控阵体制布局,利用模拟退火算法进行优化,提出采用不同孔径喇叭天线作为阵列单元的方式提升阵列性能,并对主波束效率最大化及副瓣电平最平坦两种准则下的优化结果进行比较;针对竖直方向综合孔径体制布局,设计了满足基线不缺失条件的冗余度最平均稀疏阵列布局.仿真分析结果表明优化后的阵列天线结构可满足被动成像中提升功率测量信噪比(SNR)的需求.Based on the advantages of phased array and synthetic aperture imaging method in passive mil- limeter-wave imaging, a collaborative passive millimeter-wave imaging system was developed for real-time and high resolution imaging in human security application. In the horizontal orientation, by applying annealing algorithm, different aperture horn antennas were determined for the improvement of the phased array perform- ance, which was generally compared with the maximum main beam effective and most smoothable sidelobe lev- el. In vertical orientation, the synthetic aperture, namely, the sparse antenna array was designed by the crite- rion of the most uniform redundant baseline, while baseline absence should be avoided. Finally, simulation results reveal that with the optimized antenna array the requirement of increasing singal-to-noise ratio （SNR） in power measurement in the collaborative passive imaging system can be fulfilled.

关 键 词：综合孔径 相控阵 阵列优化 模拟退火算法 被动毫米波成像系统 

分 类 号：V221.3[航空宇航科学与技术—飞行器设计]