一种基于钻孔地质数据的快速递进三维地质建模方法  

A fast progressive 3D geological modeling method based on borehole data

作　　者：唐丙寅[1] 吴冲龙[2,3] 李新川[2] 陈麒玉[2] 慕洪涛 

机构地区：[1]中国地质大学(武汉)资源学院,湖北武汉430074 [2]中国地质大学(武汉)计算机学院,湖北武汉430074 [3]中国地质大学(武汉)教育部长江三峡库区地质灾害研究中心,湖北武汉430074 [4]河南宏阳矿业有限公司,河南郑州450000

出　　处：《岩土力学》2015年第12期3633-3638,共6页Rock and Soil Mechanics

基　　金：国家高技术研究发展计划(863计划)(No.2008AA121602;No.2012AA121401)~~

摘　　要：三维地质建模是地质数据可视化和空间分析的关键技术之一。针对传统建模方法建模速度慢、建模效率和精度较低的问题,提出了一种直接基于钻孔的点→线→面→体快速递进三维地质建模方法。该方法先对钻孔地层信息进行人机交互对比构成地质剖面,再按钻孔实际坐标在三维空间中还原地质剖面的实际位置,接着通过对剖面间的地层连线进行Kriging插值,形成一系列地层面模型,然后以此为基础构建三维地质框架模型,最后利用BSP矢量剪切技术来裁剪模型边界,形成研究区三维地质模型。该方法在福州市上街镇三维城市地质模型构建的实际应用中得到了验证。实践结果表明,该方法不仅可以实现三维地质模型的快速构建,还可以显著提高三维地质模型的精度。The 3D geological modeling is one of the key technologies in spatial analysis and visulization of geological data. To improve the speed, efficiency and accuracy of geological modeling, a fast progressive 3D geological modeling method（FPGM） from point to line to surface to body with borehole data has been proposed in this paper. Firstly, the geological profiles are constructed with strata data of boreholes by human-computer interaction, then the real positon of geological profile is restored in 3D space according to the coordinates of the boreholes. After that, using the same strata lines in sections, a series of strata surfaces model are constructed by Kriging interpolation. Based on the steps above, the frame model would be accomplished. Finally, the binary space partitioning（BSP） vector shear technology is adopted to cut the boundary of the model, thus a 3D geological model of study area is constructed. This method has been applied to the construction of 3D geological modeling in Shangjie Town, Fuzhou city, showing that this method can not only realize the fast construction of 3D geological model but also improve the accuracy of the model remarkably.

关 键 词：三维地质建模 KRIGING插值 快速建模 BSP矢量剪切技术 

分 类 号：TU42[建筑科学—岩土工程]