空气变形喷嘴内流场的数值模拟  

Numerical simulation of inner flow field of air texturing nozzle

作　　者：尚润琪 屈银虎[1] 王翔[1] 刘翠[2] 

机构地区：[1]西安工程大学机电工程学院,陕西西安710048 [2]国家知识产权局专利局专利审查协作江苏中心,江苏苏州215011

出　　处：《西安工程大学学报》2015年第6期698-701,共4页Journal of Xi’an Polytechnic University

基　　金：陕西省教育厅服务地方专项计划资助项目(14JF007)

摘　　要：以单排三孔空气变形喷嘴为研究对象,利用Pro/e建立空气变形喷嘴内流道的几何模型,通过Fluent软件采用SSTk-ω湍流模型对内流道气流三维模型进行数值模拟研究空气变形喷嘴气流运动特性,以确定单排三孔空气变形喷嘴的结构是否合理.结果表明,喷嘴内流场上下游能够产生足够的压力差和速度梯度,利于纱线丝束形成稳定丝圈,对优化空气变形喷嘴内流道的相关参数具有参考价值.The air texturing nozzle with 3 air-inlet holes uniformly distributed in one circle and one central hole was researched. The geometrical model of the inner channel was built up by Pro/e, and flow field of inner channel was simulated by the SST k-ω turbulent model with Flu- ent software to study airflow movement characteristics in the air texturing nozzle and determine whether this nozzle structure is reasonable. The simulation results show that there is enough pressure difference and velocity gradient in the nozzle channel, which is beneficial to forming stable yarn circles. It can provide references for optimizing the parameters for the Hema-type air texturing nozzle.

关 键 词：空气变形喷嘴 Fluent内流场 数值模拟 

分 类 号：TS15[轻工技术与工程—纺织材料与纺织品设计]